|
|
|
Technology Suppliers Reference |
ELECTRICAL SYSTEM
20271/50013 Electrical Potting System is a black, epoxy that has a moderate mixed viscosity and a long gel time. This system is highlighted by low shrinkage and low exotherm. System Components: USE
Designed for ambient cured
applications requiring complete impregnation. System may be used with or without
vacuum. The moderate viscosity and long gel time make this a viable system for
high speed production or manual applications. The cured system has excellent
thermal shock resistance. PRODUCT DATA Color: Cure Cycle: Working Time (ASTM D-2471) Gel Time (ASTM D-2471) Viscosity (ASTM D-2393) Density, lbs./gal. (specific gravity) Mixing Ratio: Shelf Life Hardness (ASTM D-2240) Thermal conductivity, BTU in/(hr ft2 oF) 3.8 CTE, mm/mm/oC 28 x 10-6 ELECTRICAL PROPERTIES
Dielectric Constant,
Dissipation Factor
Volume Resistance, Ohm-cm 3.5 x 1015 Dielectric Strength, volts/mil 355
|
|
Home Page Return to top of page
Email Comments: jim.hallstrom@comcast.net Copyright © 2001-2010 Potting Solutions, LLCLast Modified: May 24, 2010 |