Technology
Overview
Potting Types
Potting Compound
Part design
Problem Solution
Potting Hints
Hardening Process
Equipment
Cost Calculations
Shells & Molds
Mfg. Process

Suppliers
Potting Compound
Accessories
Equipment
Adhesion Primers
Contract Potting
Packaging
Potting Removers
Consulting

Reference
Glossary
Temperature conversion
Trademarks

Potting Removers

Sometimes it is necessary to remove the potting compound from the device for failure analysis or other reasons. Heat and cold or solvents and other chemicals can be used as suggested in the Technology Potting Hints section of this site.  Also there is one company that will remove the potting compound for you using their proprietary process especially for failure analysis.

Here is the contact information for the company, click on their name to link to their web site:

Innovation Services, Inc. 342 Mapletree Drive, Knoxville, TN 37922-0831 Phone: (865)671-2279  Fax: (865) 675-0179

    Home Page          Return to top of page

Email Comments: jim.hallstrom@comcast.net

  Copyright © 2001-2007 Potting Solutions, LLC

Last Modified: June 13, 2007